LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> Sebring Convertible L4-2.4L >> Repair and Diagnosis >> Sensors and Switches >> Sensors and Switches - Powertrain Management >> Sensors and Switches - Ignition System >> Ignition Switch >> Ignition Switch Lock Cylinder >> Service and Repair >> Ignition Lock Cylinder - Removal

Ignition Lock Cylinder - Removal






REMOVAL





1. Remove instrument cluster bezel, Instrument Cluster Bezel - Removal.





2. Insert key and rotate to the one o'clock position.
3. Use thin screw driver to depress locking pin for key cylinder.
4. Pull key assembly from switch housing.

scientia non olet · About LEMON Manuals