LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> Sebring Base, 2D Convertible, EDG >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Hood >> Cable, Hood Release >> Removal >> Removal

Cable, Hood Release: Removal: Removal

Fig 1: Hood Release Handle
GC0122957Courtesy of CHRYSLER LLC
  1. Remove hood latch. See Body/Hood/LATCH, Hood - Removal .
  2. Remove left front cowl trim panel.
  3. Remove screws (2) attaching hood release handle to inner cowl panel (3).
    Fig 2: Cable Route
    GC0122958Courtesy of CHRYSLER LLC
  4. Release clips (5) attaching hood release cable to left inner frame rail.
  5. Disengage rubber grommet at lower dash panel.
  6. Disengage push-in fastener attaching hood release cable (1) to dash panel.
  7. Remove hood release cable (1) from vehicle.
scientia non olet · About LEMON Manuals