Mid Panel Weatherstrip

Fig 1: Center Rail Trim Push Pins

Courtesy of CHRYSLER LLC

Position top to the vertical position. See Body/Convertible Top - Description .
Using a trim stick or equivalent, gently remove both push pins (2) in the bottom of the right and left center rail trim (1).
Gently pry off both left and right center rail trim.

Fig 2: Drain Tubes
Courtesy of CHRYSLER LLC
Disengage front and rear drain tubes (1) from each side.

Fig 3: Locating Fasteners
Courtesy of CHRYSLER LLC
Remove eight fasteners (1), two per corner, from the mid panel weatherstrip.

Fig 4: Seal Retainer
Courtesy of CHRYSLER LLC
Carefully pull side rail portion of the weatherstrip (2) away from the seal retainer (2).
Carefully pull cross-car portion of the seal away from the panel.
Lift seal around mid panel and remove from vehicle.