LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> Sebring Base, 2D Convertible, ED3 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Weatherstrip/Seals >> Weatherstrip, Convertible Top >> Removal >> DECKLID Weatherstrip

DECKLID Weatherstrip

Fig 1: Decklid Weatherstrip
GC0123065Courtesy of CHRYSLER LLC
  1. Place convertible top in vertical position and decklid into service position. See Body/Convertible Top - Description .
  2. Remove four fasteners (1), two on each side.
    Fig 2: Locating Fasteners & Push Pins
    GC0123066Courtesy of CHRYSLER LLC
  3. Remove push pins (2), one on each side.
  4. Carefully pull off weatherstrip.
  5. Clean residue left behind from the weatherstrip.
scientia non olet · About LEMON Manuals