LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> Sebring Base, 2D Convertible, ED3 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Convertible Top, Retractable Hard Top Unique Components >> Top, Folding >> Removal >> Rear Panel

Rear Panel

Fig 1: Heated Glass Electrical Connectors
GC0122888Courtesy of CHRYSLER LLC
  1. Remove the mid/rear headliner as necessary. See Body/Convertible Top/HEADLINER - Removal .
  2. Mark the location of the hinge bracket to rear panel (4) to aid in installation.
  3. Disconnect the heated glass connectors (3) and remove the harness from the rear panel.
  4. Remove the lower fastener (2).
  5. Remove the two lower fasteners (1), leaving the top one on each side, that secure the rear panel to the hinge assemblies.
  6. With the help of assistant, remove remaining fasteners and remove rear panel.
scientia non olet · About LEMON Manuals