LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> Sebring Base, 2D Convertible, ED3 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Convertible Top, Retractable Hard Top Unique Components >> Top, Folding >> Removal >> Front Panel

Front Panel

Fig 1: Forward Mounting Fastener, Cable & Cable Retainer
GC0122902Courtesy of CHRYSLER LLC
  1. Place the top in the vertical position.
  2. Remove the center rail trim panels. See Body/Convertible Top/TRIM - Removal .
  3. Remove the front headliner. See Body/Convertible Top/HEADLINER - Removal .
  4. Remove the hinge covers.
  5. Disengage the cable retainer (1) from the top panel.
  6. Disconnect the cable (2) from the top panel linkage.
  7. Lower the top to the header, do not latch.
  8. Remove the forward mounting fastener (3) on each side.
  9. Remove the rearward mounting fastener (4) on each side.
  10. With help from an assistant, carefully remove the front panel from the vehicle.
scientia non olet · About LEMON Manuals