LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> Sebring Base, 2D Convertible, ED3 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Convertible Top, Retractable Hard Top Unique Components >> Capture System, Front Panel Down >> Removal >> Center Down Capture

Center Down Capture

Fig 1: Down Capture Assembly
GC0122893Courtesy of CHRYSLER LLC
  1. Remove the mid/rear headliner. See Body/Convertible Top/HEADLINER - Removal .
  2. Remove the center rail trim by removing the two lower push pins then carefully pulling the trim away from the center rail (2).
  3. Remove the clip (3) from the pin at the bottom of the down capture assembly (4).
  4. Remove the screw securing the top of the assembly to the center rail.
  5. Remove the assembly from the convertible top.
scientia non olet · About LEMON Manuals