Water Leak - Zone D
- Rear Trough weatherstrip (2) not installed correctly.
- Replace the weatherstrip. See Body/Weatherstrip/Seals/WEATHERSTRIP, Convertible Top - Removal .
- Retest for water leaks. See Body/Convertible Top - Standard Procedure .
- Decklid weatherstrip (3) not installed correctly.
- Replace the weatherstrip. See Body/Weatherstrip/Seals/WEATHERSTRIP, Convertible Top - Removal .
- Retest for water leaks. See Body/Convertible Top - Standard Procedure .
- Weatherstrip decklid tape backing (1) not removed.
- Remove the tape backing and ensure the decklid seal (2) is attached to the quarter panel.
- Retest for water leaks. See Body/Convertible Top - Standard Procedure .
- Decklid mounted foam (1) missing or not installed correctly.
- Adjust the placement of the foam on the decklid (2).
- Install new foam to the decklid. Ensure the foam contacts convertible top seal and decklid seal mold when the decklid is closed.
- Retest for water leaks. See Body/Convertible Top - Standard Procedure .