LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> PT Cruiser Limited >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> 41TE Automatic Transmission (Service Information) >> Diagnosis and Testing >> Hydraulic Pressure Tests >> TEST TWO-SELECTOR IN DRIVE (2nd GEAR)

TEST TWO-SELECTOR IN DRIVE (2nd GEAR)

NOTE: This test checks the underdrive clutch hydraulic circuit as well as the shift schedule.
  1. Attach gauge to the underdrive clutch tap.
  2. Move selector lever to the 3 position.
  3. Allow vehicle wheels to turn and increase throttle opening to achieve an indicated vehicle speed of 30 mph.
  4. In second gear the underdrive clutch pressure should read 110 to 145 psi.
scientia non olet · About LEMON Manuals