LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> PT Cruiser Limited >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> 41TE Automatic Transmission (Service Information) >> Diagnosis and Testing >> Hydraulic Pressure Tests >> TEST THREE-OVERDRIVE CLUTCH CHECK (3rd and 2nd Gear)

TEST THREE-OVERDRIVE CLUTCH CHECK (3rd and 2nd Gear)

  1. Attach gauge to the overdrive clutch tap.
  2. Move selector lever to the (OD) position.
  3. Allow vehicle wheels to turn and increase throttle opening to achieve an indicated vehicle speed of 20 mph. Vehicle should be in 3rd gear.
  4. Overdrive clutch pressure should read 74 to 95 psi.
  5. Move selector lever to the (3) position and increase indicated vehicle speed to 30 mph.
  6. The vehicle should be in second gear and overdrive clutch pressure should be less than 5 psi.
  7. This test checks the overdrive clutch hydraulic circuit as well as the shift schedule.
scientia non olet · About LEMON Manuals