Clutch Air Pressure Tests: Notes

Fig 1: Air Pressure Test Plate

Courtesy of CHRYSLER LLC

1 - AIR PRESSURE TEST PLATE TOOL 6056

2 - ACCUMULATORS

Inoperative clutches can be located using a series of tests by substituting air pressure for fluid pressure using Air Pressure Test Plate 6056 (1) .

Fig 2: Testing Reverse Clutch

Courtesy of CHRYSLER LLC

1 - AIR PRESSURE TEST PLATE 6056

2 - AIR NOZZLE

The clutches may be tested by applying air pressure (2) to their respective passages. The valve body must be removed and Air Pressure Test Plate 6056 (1) installed. To make air pressure tests, proceed as follows:

NOTE: The compressed air supply must be free of all dirt and moisture. Use a pressure of 30 psi.

Remove oil pan and valve body. See Transmission and Transfer Case/Automatic - 41TE/VALVE BODY - Removal .