LEMON Manuals: Even more car manuals for everyone

Home >> Chrysler >> 2009 >> PT Cruiser Limited >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> (Totally Integrated Power Module (TIPM) - Electrical Diagnostics) >> DTC Troubleshooting >> P127F-Fuel Pump Control Circuit 2 OVERCURRENT >> Set Conditions

Set Conditions

Set Condition:
An overcurrent condition is detected in the Fuel Pump control output circuit. One Trip Fault. Three good trips to turn off the MIL.

scientia non olet · About LEMON Manuals