Diesel Engine

Fig 1: Coolant Recovery Pressure Container

Courtesy of CHRYSLER LLC

1 - COOLANT RECOVERY PRESSURE CONTAINER

2 - DASH PANEL

3 - COOLANT HOSE

4 - RETAINING BOLTS

5 - RETAINING NUT

Partially drain cooling system using the draincock only. See Cooling - Standard Procedure . Drain system below level of the coolant recovery pressure container.
Remove engine cover.
Disconnect hose and remove oil separator from top of valve cover.
Remove fuel filter heater and position aside.
Disconnect return hose at coolant recovery container (1).
Remove coolant recovery container mounting bolts bolt.
Lift container up at disconnect coolant hose from left side of coolant recovery container
Remove coolant recovery container from engine compartment.