2.2L Diesel

Fig 1: Accessory Drive Belt

Courtesy of CHRYSLER LLC

1 - GENERATOR

2 - ACCESSORY DRIVE BELT

3 - IDLER PULLEY

4 - A/C COMPRESSOR

5 - POWER STEERING PUMP

6 - CRANKSHAFT PULLEY/VIBRATION DAMPER

7 - BELT TENSIONER PULLEY

8 - BELT TENSIONER

Install tensioner pulley (7) and bolt, if removed. Tighten bolt to 27 N.m (20 ft. lbs.).
Install tensioner assembly (8) to engine and tighten bolt to 54 N.m (40 ft. lbs.).
Install accessory drive belt (2). See Cooling/Accessory Drive/BELT, Serpentine - Installation .