LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> PT Cruiser Limited >> Repair and Diagnosis >> Steering >> Steering Linkage >> Rack & Pinion Power Steering System >> Pump >> Reservoir, Power Steering Pump >> Removal >> 2.2L Diesel

2.2L Diesel

NOTE: Before proceeding. See Steering - Warning .
  1. Remove the engine top appearance cover.
  2. Remove the engine air cleaner. Refer to Engine/Air Intake System/BODY, Air Cleaner - Removal
  3. Siphon as much fluid as possible from power steering fluid reservoir.
    Fig 1: Return Hose Mounting
    GC0115281Courtesy of CHRYSLER LLC
  4. Remove the hose clamp securing the return hose (2) to the reservoir fitting. Slide the hose off the end of the reservoir fitting.
    Fig 2: Hoses At Pump And Reservoir
    GC0115277Courtesy of CHRYSLER LLC
    1 - FLUID RESERVOIR
    2 - SUPPLY HOSE
    3 - PRESSURE HOSE
  5. Remove the hose clamp securing the supply hose (2) to the reservoir fitting. Slide hose off end of reservoir fitting.
    Fig 3: Power Steering Fluid Reservoir Mounting
    GC0115291Courtesy of CHRYSLER LLC
  6. Remove the mounting bolts securing the reservoir in place. Remove the reservoir.