LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> PT Cruiser Limited >> Repair and Diagnosis >> Steering >> Steering Linkage >> Rack & Pinion Power Steering System >> Pump >> Pulley, Power Steering Pump >> Removal >> Diesel

Pulley, Power Steering Pump: Removal: Diesel

NOTE: Before proceeding. See Steering - Warning .
  1. Raise and support the vehicle. Refer to Vehicle Quick Reference/Hoisting - Standard Procedure
    Fig 1: Engine Compartment Lower Silencer
    GC0115273Courtesy of CHRYSLER LLC
    1 - ENGINE COMPARTMENT SILENCER
    2 - ACCESSORY DRIVE BELT SPLASH SHIELD
  2. Remove the lower engine compartment silencer assembly (1) and the accessory drive belt splash shield (2).
  3. Remove the accessory drive belt. Refer to Cooling/Accessory Drive/BELT, Serpentine - Removal .
    Fig 2: Pump Pulley Mounting
    GC0115276Courtesy of CHRYSLER LLC
    1 - PULLEY MOUNTING BOLTS
    2 - RIGHT FRAME RAIL
    3 - PRESSURE HOSE FITTING
    4 - PULLEY
  4. Remove the three bolts (1) securing the pulley to the power steering pump. Remove the pulley.