LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> PT Cruiser Limited >> Repair and Diagnosis >> Steering >> Steering Linkage >> Rack & Pinion Power Steering System >> Pump >> Hose, Power Steering, Supply >> Removal >> 2.2L Diesel

2.2L Diesel

NOTE: Before proceeding. See Steering - Warning .
  1. Disconnect the battery negative (-) terminal.
    Fig 1: Engine Top Cover Mounting
    GC0115287Courtesy of CHRYSLER LLC
  2. Remove the engine top appearance cover.
  3. Siphon as much fluid as possible from power steering fluid reservoir.
  4. Remove radiator fan. Refer to Cooling/Engine/FAN, Cooling - Removal
    Fig 2: Hoses At Pump And Reservoir
    GC0115277Courtesy of CHRYSLER LLC
    1 - FLUID RESERVOIR
    2 - SUPPLY HOSE
    3 - PRESSURE HOSE
  5. Remove the clamp securing the supply hose (2) to the power steering pump supply fitting, then remove the hose from the fitting.
  6. Remove the hose clamp securing supply hose (2) to the power steering fluid reservoir (1). Slide the hose off the end of the reservoir fitting and remove from vehicle.