Diagnostic Test

TOTALLY INTEGRATED POWER MODULE FAILURE
1. Turn the ignition on.
2. With the scan tool, read TIPM DTCs.
  NOTE: Check the connectors - Clean and repair as necessary.
  
  Does the scan tool display any TIPM DTCs?
  
  Yes
  - Select appropriate symptom from Symptom List. Refer to DTC-Based Diagnostics/MODULE, Totally Integrated Power (TIPM) - Diagnosis and Testing . Repair all TIPM active DTCs and before diagnosing the ORC DTCs.
  No
  - Replace the Totally Integrated Power Module (TIPM) in accordance with the Service Information.
  - Perform the BODY VERIFICATION TEST. Refer to DTC-Based Diagnostics/MODULE, Totally Integrated Power (TIPM) - Standard Procedure .