LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> PT Cruiser Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (40TE Automatic Transmission (Service Information)) >> Diagnosis and Testing >> Hydraulic Pressure Tests >> TEST FOUR-SELECTOR IN OVERDRIVE (4th Gear)

TEST FOUR-SELECTOR IN OVERDRIVE (4th Gear)

WARNING: This page is about a different variant/trim than selected.
  1. Attach gauge to the 2/4 clutch tap.
  2. Move selector lever to the (OD) position.
  3. Allow vehicle front wheels to turn and increase throttle opening to achieve an indicated vehicle speed of 30 mph. Vehicle should be in 4th gear.
  4. The 2/4 clutch pressure should read 75 to 95 psi.
  5. This test checks the 2/4 clutch hydraulic circuit.
scientia non olet · About LEMON Manuals