LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> PT Cruiser Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (40TE Automatic Transmission (Service Information)) >> Diagnosis and Testing >> Clutch Air Pressure Tests >> Low/Reverse Clutch

Low/Reverse Clutch

WARNING: This page is about a different variant/trim than selected.

Apply air pressure to the low/reverse clutch feed hole (rear of case, between 2 bolt holes). Then, look in the area where the low/reverse piston contacts the first separator plate. Watch carefully for the piston to move forward. The piston should return to its original position after the air pressure is removed.

scientia non olet · About LEMON Manuals