LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> PT Cruiser Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Clutch System) >> Switch, Clutch Starter Interlock And UPSTOP >> Diagnosis And Testing >> Clutch Interlock/UPSTOP Switch >> UPSTOP Switch >> Mechanical Test (2.2L Turbo Diesel Models)

Mechanical Test (2.2L Turbo Diesel Models)

WARNING: This page is about a different variant/trim than selected.
  1. Raise vehicle on hoist.
  2. Start engine and operate speed control to maintain speed.
  3. Depress clutch pedal at least 33 mm (1.30 in.). Speed control operation should terminate. If speed control does not terminate, the upstop switch is defective or the related wiring is shorted. Proceed to the upstop switch electrical test.
scientia non olet · About LEMON Manuals