Possible Causes
WARNING: This page is about a different car, the 2009 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.
| Possible Causes |
|---|
| MAP SENSOR WIRING OR CONNECTORS |
| (F856) 5 VOLT SUPPLY CIRCUIT HIGH RESISTANCE |
| (K1) MAP SIGNAL CIRCUIT HIGH RESISTANCE |
| (K900) SENSOR GROUND CIRCUIT HIGH RESISTANCE |
| MAP SENSOR |
Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. See DTC-Based Diagnostics/MODULE, Powertrain Control (PCM) - Standard Procedure .