No Response With A No Start Condition: Notes
WARNING: This page is about a different car, the 2009 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.
For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .
| Possible Causes |
|---|
| (A931) FUSED B+ CIRCUIT (PCM) |
| (F202) FUSED IGNITION SWITCH OUTPUT (RUN-START) CIRCUITS (PCM) |
| (Z925) PCM GROUND CIRCUITS (PCM) |
| (K51) MAIN RELAY CONTROL CIRCUIT |
| (A14) FUSED B+ CIRCUIT (MAIN RELAY) |
| (A935) FUSED B+ CIRCUIT (MAIN RELAY) |
| (K542) MAIN RELAY OUTPUT CIRCUIT (TO TIPM) |
| (F342/F343/344) MAIN RELAY OUTPUT CIRCUIT (TO PCM) |
| TOTALLY INTEGRATED POWER MODULE (TIPM) |
| POWERTRAIN CONTROL MODULE (PCM) |