Diagnostic Test
WARNING: This page is about a different car, the 2009 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FOR AN ACTIVE DTC
- Turn the ignition on.
- With the scan tool, record and erase DTCs.
- Press the TRIP/TOGGLE switch three times.
- With the scan tool, read DTCs.
Does the scan tool display: B1265-TRIP/TOGGLE SWITCH STUCK?
Yes
- Replace the Cluster in accordance with the Service Information.
- Perform the BODY VERIFICATION TEST. Refer to DTC-Based Diagnostics/MODULE, Totally Integrated Power (TIPM) - Standard Procedure
No
- Test complete.