Installation - Charge Air Cooler Hoses

WARNING: This page is about a different car, the 2009 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Charge Air Cooler & Hoses

Courtesy of CHRYSLER LLC

NOTE: ILLUSTRATION SHOWN IN Fig 1 WITH FASCIA REMOVED FOR CLARITY.

Install the lower charge air outlet tube (3).Tighten the clamps to 1.7 N.m (15 in. lbs.).
Install the upper charge air inlet tube (1). Tighten the clamps to 1.7 N.m (15 in. lbs.).
Install the upper radiator closure panel. Refer to Body/Exterior/PANEL, Closure - Installation .