LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> PT Cruiser Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (2.0L Engine (Service Information)) >> Engine Block >> Crankshaft >> Standard Procedure >> Measuring Crankshaft End Play

Measuring Crankshaft End Play

WARNING: This page is about a different car, the 2009 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Checking Crankshaft End Play Using Dial Indicator
GC0102726Courtesy of CHRYSLER LLC
1 - Crankshaft
2 - DIAL INDICATOR
  1. Mount a dial indicator (2) to front of engine with the locating probe on nose of crankshaft (1) .
  2. Move crankshaft all the way to the rear of its travel.
  3. Zero the dial indicator.
  4. Move crankshaft all the way to the front and read the dial indicator. For end play specification, see Engine - Specifications .
scientia non olet · About LEMON Manuals