LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> PT Cruiser Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (2.0L Engine (Service Information)) >> Cylinder Head >> CAMSHAFT, Engine >> Standard Procedure >> Measuring Camshaft End Play

Measuring Camshaft End Play

WARNING: This page is about a different car, the 2009 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Checking Camshaft End Play
GC0102854Courtesy of CHRYSLER LLC
  1. Using a suitable tool, move camshaft as far rearward as it will go.
  2. Zero dial indicator.
  3. Move camshaft as far forward as it will go.
  4. Record reading on dial indicator. For end play specification, see Engine - Specifications .
  5. If end play is excessive, check cylinder head and camshaft for wear; replace as necessary.
scientia non olet · About LEMON Manuals