PANEL, Liftgate Trim, Lower Without Speaker: Removal: Removal
WARNING: This page is about a different car, the 2009 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.
- Remove upper liftgate molding. See Body/Interior/MOLDING, Liftgate - Removal
- Remove liftgate upper side molding. See Body/Interior/MOLDING, Liftgate - Removal
- Remove liftgate screws (2) from liftgate nuts (1).
- Using special tool C-4755, pry up liftgate trim tabs (4) from liftgate.
- Remove lower liftgate trim (3) from vehicle.