MOTOR, Sunroof: Removal: Removal
WARNING: This page is about a different car, the 2009 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - ELECTRICAL CONNECTOR |
| 2 - MODULE ASSEMBLY |
| 3 - DRIVE MOTOR |
| 4 - MOUNTING SCREWS |
- Remove headliner. Refer to Body/Interior/HEADLINER - Removal .
- Disconnect the electrical connector (1).
- Remove three motor assembly attaching screws (4) from bottom side of motor assembly (3) and remove motor assembly from the motor bracket.