LAMP, Courtesy, Reading: Removal: Unit

WARNING: This page is about a different car, the 2009 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Right Side Tab Of Courtesy/Reading Lamp Lens

Courtesy of CHRYSLER LLC

Insert a trim stick between the lamp bezel (4) and courtesy/reading lamp lens (3) on the left side of the courtesy/reading lamp at (1).
Carefully swing lamp lens (3) toward the right side of the vehicle so that the tab (2) on the lens can come out of the lamp unit (4).

Fig 2: Backside View Of Courtesy/Reading Lamp Unit
Courtesy of CHRYSLER LLC
As shown from the backside in the illustration above, once the tab (1) from the lens is out of the way, the right side will pull down from the headliner and then pull to the right to release the unit retaining tab (2).

Fig 3: Identifying Courtesy/Reading Lamp Unit & Electrical Connector
Courtesy of CHRYSLER LLC
Disconnect the courtesy/reading lamp unit (1) electrical connector (2).