Bulb - Without Flashlight Feature
WARNING: This page is about a different car, the 2009 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
There are two types of cargo lamps available in this vehicle; one with and one without a removable flashlight feature.
- Disconnect and isolate the battery negative cable.
- Insert the tip of a small flat-bladed screwdriver into the notch on one side of the cargo lamp between the lens (4) and the lamp housing (1).
- Gently pry the notched edge of the lens downward until it unsnaps from the housing.
- Swing the notched end of the lens downward far enough to access the bulb (3).
- Carefully unsnap the bulb from the two bulb holders within the cargo lamp housing.