LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> PT Cruiser Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Ignition Control (Service Information)) >> SENSOR, Camshaft Position >> Removal >> Front

SENSOR, Camshaft Position: Removal: Front

WARNING: This page is about a different car, the 2009 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Disconnecting/Connecting Electrical Connector At Camshaft Position Sensor
GC0082374Courtesy of CHRYSLER LLC
  1. Remove the air cleaner hose to throttle body, disconnect the inlet air temperature sensor electrical connector.
  2. Disconnect negative battery cable.
  3. Disconnect electrical connector from camshaft position sensor.
  4. Remove camshaft position sensor mounting screws.
    Fig 2: Removing/Installing Camshaft Position Sensor
    GC0082375Courtesy of CHRYSLER LLC
  5. Remove sensor.
scientia non olet · About LEMON Manuals