LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> PT Cruiser Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Ignition Control (Service Information)) >> COIL, Ignition >> Installation >> Installation

COIL, Ignition: Installation: Installation

WARNING: This page is about a different car, the 2009 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Ignition Coil
GC0082371Courtesy of CHRYSLER LLC
  1. Install ignition coil.
    Fig 2: Removing/Installing Ignition Coil Mounting Bolts
    GC0082370Courtesy of CHRYSLER LLC
  2. Tighten bolt to 9 N.m (79.5 in. lbs.).
  3. Connect electrical connectors and lock.
  4. Install the negative battery cable.
scientia non olet · About LEMON Manuals