NOZZLE, Washer: Removal: Rear
WARNING: This page is about a different car, the 2009 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the battery negative cable.
- Remove the fasteners that secure the spoiler (3) to the liftgate outer panel (1). Refer to Body/Decklid/Hatch/Liftgate/Tailgate/LIFTGATE - Removal .
- Pull the spoiler away from the liftgate far enough to access and disconnect the liftgate washer supply hose (2) from the barbed nipple on the back of the rear washer nozzle (4).
- From the back of the spoiler, depress the two integral latch features of the nozzle, while pulling the nozzle out through the face of the spoiler.