LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> PT Cruiser Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Engine & Automatic Transmission Cooling System) >> Engine >> Thermostat >> Removal >> Secondary Thermostat - Turbocharged Engine

Secondary Thermostat - Turbocharged Engine

WARNING: This page is about a different car, the 2009 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Secondary Thermostat - Turbocharged Engine
GC0102556Courtesy of CHRYSLER LLC
NOTE: Turbocharged engines use a orifice plate in place of a secondary thermostat.
  1. Disconnect and isolate the negative battery cable.
  2. Remove the air filter assembly. Refer to Engine/Air Intake System/BODY, Air Cleaner - Removal
  3. Partially drain the cooling system. See Cooling - Standard Procedure 
  4. Disconnect the ECT sensor electrical connector 2).
  5. Remove the coolant hose (1) from the thermostat housing (2).
  6. Remove the coolant hose (4) from the coolant adapter (6).
  7. Remove the coolant hose (5) from the coolant adapter (6)
  8. Remove the coolant hose (7) from the coolant adapter (6).
  9. Remove the coolant hose (8) from the coolant adapter (6).
  10. Remove the coolant adapter mounting bolts (9).
  11. Remove the coolant adapter (6) and the orifice plate.
scientia non olet · About LEMON Manuals