LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> PT Cruiser Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Engine & Automatic Transmission Cooling System) >> Engine >> SENSOR, Coolant Temperature >> Removal >> Gas Engine >> Coolant Adapter Mounted

Coolant Adapter Mounted

WARNING: This page is about a different car, the 2009 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: ECT SENSOR - GAS ENGINE - COOLANT ADAPTER
GC0083975Courtesy of CHRYSLER LLC
1 - ETC
2 - COOLANT ADAPTER
  1. Disconnect negative battery cable.
  2. Partially drain cooling system below level of ECT Sensor (1). See Cooling - Standard Procedure 
  3. Disconnect ECT Sensor electrical connector.
  4. Remove ECT Sensor (1).
scientia non olet · About LEMON Manuals