LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> PT Cruiser Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Engine & Automatic Transmission Cooling System) >> Engine >> SENSOR, Coolant Temperature >> Installation >> Gas Engine >> Cylinder Block Mounted

Cylinder Block Mounted

WARNING: This page is about a different car, the 2009 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the ECT Sensor. Tighten the sensor to 19 N.m (168 in. lbs.).
  2. Reconnect the ECT Sensor electrical connector.
  3. Fill the cooling system. See Cooling - Standard Procedure .
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals