Diesel Engine
WARNING: This page is about a different car, the 2009 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - FUEL RAIL |
| 2 - EGR VALVE |
| 3 - POWER STEERING PUMP |
| 4 - GENERATOR |
| 5 - COOLANT TEMPERATURE SENSOR |
| 6 - THERMOSTAT HOUSING |
| 7 - FUEL RAIL PRESSURE SENSOR |
- Position and install coolant temperature sensor (5).
- Connect coolant temperature sensor electrical connector.
1 - RETAINING CLAMP 2 - ENGINE COOLANT TEMPERATURE SENSOR - Refill coolant system to proper level with proper mixture of coolant. See Cooling - Standard Procedure .
- Install engine cover. Refer to Engine - Installation .
- Connect negative battery cable.WARNING: Use extreme caution when engine is operating. Do not stand in a direct line with fan. Do not put your hands near pulleys, belts or fan. Do not wear loose clothes.
- Start engine and inspect for leaks.