Gas Engine
WARNING: This page is about a different car, the 2009 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - UPPER RADIATOR CLOSURE PANEL |
| 2 - COOLING MODULE |
| 3 - RADIATOR FAN CONNECTOR |
| 4 - LOWER RADIATOR CROSSMEMBER |
WARNING:
DO NOT OPEN THE RADIATOR DRAINCOCK WITH THE SYSTEM HOT AND UNDER PRESSURE BECAUSE SERIOUS BURNS FROM COOLANT CAN OCCUR.
- Drain cooling system. See Cooling - Standard Procedure .
- Remove radiator fan. See Cooling/Engine/FAN, Cooling - Removal .
- Disconnect lower radiator hose.
- Remove fasteners attaching AC condenser to radiator. Reposition AC condenser.
- Remove radiator assembly by lifting it up from the engine compartment. Care should be taken not to damage the cooling fins and tubes during removal.