Diesel Engine
WARNING: This page is about a different car, the 2009 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - RETURN FITTING |
| 2 - PRESSURE CONTAINER |
| 3 - COOLANT HOSE |
- Partially drain the cooling system using the draincock only. See Cooling - Standard Procedure . Drain the system below the level of the coolant recovery pressure container (2).
- Disconnect the return hose at the coolant recovery pressure container (2).
- Remove the coolant recovery pressure container bolts.
- Lift container up and disconnect the coolant hose (3) from the bottom of the pressure container (2).
- Remove the pressure container (2) from engine compartment.