Gas Engine

WARNING: This page is about a different car, the 2009 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: SPLASH SHIELD

Courtesy of CHRYSLER LLC

1 - RIGHT MOUNT BOLT ACCESS PLUG

2 - FASCIA

3 - SPLASH SHIELD

4 - CRANKSHAFT BOLT ACCESS PLUG

Raise vehicle on hoist.

Remove belt splash shield (3).

Fig 2: ACCESSORY DRIVE BELT - GAS ENGINE

Courtesy of CHRYSLER LLC

1 - POWER STEERING PUMP

2 - ACCESSORY DRIVE BELT

3 - GENERATOR

4 - CRANKSHAFT PULLEY

5 - LOWER IDLER PULLEY

6 - CRANKSHAFT PULLEY

7 - WATER PUMP PULLEY

8 - ACCESSORY DRIVE BELT TENSIONER

9 - UPPER IDLER PULLEY

Remove accessory drive belt. See Cooling/Accessory Drive/BELT, Serpentine - Removal .
Remove accessory drive belt tensioner mounting bolt. Remove accessory drive belt tensioner (8).