Diesel Engine
WARNING: This page is about a different car, the 2009 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - GENERATOR |
| 2 - ACCESSORY DRIVE BELT |
| 3 - IDLER PULLEY |
| 4 - A/C COMPRESSOR |
| 5 - POWER STEERING PUMP |
| 6 - CRANKSHAFT PULLEY/VIBRATION DAMPER |
| 7 - BELT TENSIONER PULLEY |
| 8 - BELT TENSIONER |
- Remove accessory drive belt. See Cooling/Accessory Drive/BELT, Serpentine - Removal .
- Remove tensioner bracket mounting bolts.
- Remove tensioner assembly from engine.
- If idler pulley is to be replaced, remove pulley from tensioner.