LAMP, License Plate: Removal: Unit

WARNING: This page is about a different car, the 2009 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Prying Lamp from Liftgate

Courtesy of CHRYSLER LLC

Using a trim stick or equivalent, gently pry on the side (2) of the license plate lamp unit (1) to release it from the liftgate.

Fig 2: LICENSE PLATE LAMP 1
Courtesy of CHRYSLER LLC
Remove lamp (1) from liftgate.

Fig 3: LICENSE PLATE LAMP 2
Courtesy of CHRYSLER LLC
Twist the bulb socket 1/4 turn counter-clockwise and remove from license lamp unit.