LAMP, Fog: Installation: Unit
WARNING: This page is about a different car, the 2009 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Do not touch the glass of halogen bulbs with fingers or other possibly oily surface, reduced bulb life will result.
- Place fog lamp into fascia opening and push rearward to position into fascia.
- Reach up through the lower fascia (3) cutout.
- Install two screws attaching fog lamp to fascia (4).NOTE: It may be necessary to install the fog lamp bulb (2) if it was removed to access the fog lamp unit.
- Connect electrical connector to fog lamp (1).
- Connect the battery negative cable.