LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> PT Cruiser Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Lamps & Lighting System - Exterior (Service Information)) >> Diagnosis and Testing >> Lamps/Lighting - Exterior >> Daytime Running Lamps

Daytime Running Lamps

WARNING: This page is about a different car, the 2009 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Before performing the following tests, determine whether the headlamp low and high beams operate. If the headlamp low and high beams are also inoperative, diagnose and repair that problem before attempting to repair the Daytime Running Lamps.
CONDITION  POSSIBLE CAUSES  CORRECTION 
DAYTIME RUNNING LAMPS WILL NOT ILLUMINATE 1. Incorrect TIPM programming. 1. Use a diagnostic scan tool to check and configure TIPM as required.
2. Ineffective TIPM inputs or outputs. 2. Use a diagnostic scan tool to test the TIPM inputs and outputs as required. Refer to the appropriate diagnostic information.
scientia non olet · About LEMON Manuals