Gas Engine

WARNING: This page is about a different car, the 2009 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Before proceeding. See Steering - Warning .

Siphon as much fluid as possible from the power steering fluid reservoir.

Fig 1: Removing/Installing Supply Hose At Power Steering Pump
Courtesy of CHRYSLER LLC
Remove the clamp (2) securing the supply hose to the power steering pump (3) supply fitting, then remove the hose from the supply fitting.

Fig 2: Removing/Installing Supply Hose Clamp At Power Steering Fluid Reservoir
Courtesy of CHRYSLER LLC
Remove the hose clamp securing the supply hose (4) to the power steering fluid reservoir (5). Slide the hose off the end of the reservoir fitting and remove from vehicle.