Gas Engine - Right-Hand-Drive

WARNING: This page is about a different car, the 2009 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Tube Nut At Power Steering Pressure Hose

Courtesy of CHRYSLER LLC

NOTE: Before proceeding, see Steering - Warning .

Siphon as much fluid as possible from the power steering fluid reservoir.
Remove the engine appearance cover.
Remove the pressure Hose (3) at the pump pressure port (5).
Remove the pressure hose routing bracket bolt (2) at the upper mount (8).

Fig 2: Removing/Installing Return Hose & Pressure Hose At Steering Gear
Courtesy of CHRYSLER LLC
Raise and support the vehicle. Refer to Vehicle Quick Reference/Hoisting - Standard Procedure .
Unthread the tube nut (2) and remove the pressure hose at the steering gear.
Remove the power steering pressure hose from the vehicle.