Diesel Engine - Right-Hand-Drive

WARNING: This page is about a different car, the 2009 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Before proceeding, see Steering - Warning .

Siphon as much fluid as possible from power steering fluid reservoir.
Remove the engine appearance cover.

Fig 1: Removing/Installing Pressure Hose At Pump Pressure Port - Diesel Engine
Courtesy of CHRYSLER LLC
Remove the pressure line (3) at the pump (4).
Remove the pressure line routing bracket bolt (2) at the upper mount (7).

Fig 2: Removing/Installing Return Hose & Pressure Hose At Steering Gear
Courtesy of CHRYSLER LLC
Raise and support the vehicle. Refer to Vehicle Quick Reference/Hoisting - Standard Procedure .
Unthread the tube nut (2) and remove the pressure hose (2) at the steering gear.
Remove the power steering pressure hose from the vehicle.