Possible Causes
| Possible Causes |
|---|
| (K107) NVLD SWITCH SIGNAL CIRCUIT SHORTED TO BATTERY VOLTAGE |
| (K107) NVLD SWITCH SIGNAL CIRCUIT OPEN |
| (K107) NVLD SWITCH SIGNAL CIRCUIT SHORTED TO (K106) NVLD SOLENOID CONTROL CIRCUIT |
| (Z904) GROUND CIRCUIT OPEN |
| NVLD ASSEMBLY |
| PCM |
Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. See DTC-Based Diagnostics/MODULE, Powertrain Control (PCM) - Standard Procedure .