LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> PT Cruiser Limited >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.4L Engine (Service Information) >> Turbocharger System >> SOLENOID, Wastegate >> Installation >> WASTEGATE Solenoid

WASTEGATE Solenoid

Fig 1: Solenoid Mounting Bracket
GC0114727Courtesy of CHRYSLER LLC
  1. If removed, install the solenoid mounting bracket.
  2. Slide the solenoids onto the mounting tab until the lock tab (1) engages.
  3. Connect vacuum harness connector to solenoid.
    Fig 2: Nuts Securing Solenoid Mounting Bracket
    GC0114726Courtesy of CHRYSLER LLC
  4. Install the nuts securing the solenoid mounting bracket to the shock tower (1).
    Fig 3: Wastegate Solenoid & Electrical Connectors
    GC0114725Courtesy of CHRYSLER LLC
  5. Connect solenoid electrical connectors (3, 4 and 5).
scientia non olet · About LEMON Manuals